2022 John Deere DEMO-- 2025R

$34,999.99

$34,999.99

Key Features

New/Used New
Usage15 Hours
Availability In Stock
LocationBoone's Power Equipment, Inc.
Stock # 137684
Condition Excellent

Product Features

Dealer Notes
Features include:
- Hydro Transmission
- R3 Radial Tires
- 120R Loader with 53” Quick Attach Bucket
- 260B Backhoe with 12” bucket
- Mechanical Thumb on backhoe
- 60” Drive Over Auto-Connect Mower Deck
- Load-n-Go Ramps

$499.99/mo 8.6% for 72 months with 20% down payment. Plus sales tax.

Optional Woods 2200lb Pallet Forks are $1399.99

Description

Key Features
  • Powerful and fuel-efficient Tier IV Yanmar engine
  • Hydro transmission with TwinTouch™ pedals for ease of use
  • AutoConnect™ 7-Iron Drive-over mower decks up to 60 inches
Key Specs
  • Engine power (gross): 17.8 kW / 23.9 hp / SAE J1995 rated power
  • Power take-off (PTO) power: 13.4 kW / 18 hp
  • Steering hydraulics: 13.25 L/min / 3.5 gpm
  • Implement hydraulics: 13.25 L/min / 3.5 gpm
  • Hitch type: Limited Category 1
  • Lift capacity, 24-in. behind link arms: 400 kg / 882 lb.
  • Standard transmission; forward/reverse: Hydrostatic - 2 range
  • Cruise control: Standard
  • Approximate shipping weight (open-station; cab): 813.5 kg / 1793.4 lb.
  • Wheelbase: 1600 mm / 63 in.
Engine
  • Family: GYDXL1.27NS1 / HYDXL1.27NS1
  • Manufacturer: Yanmar
  • Engine model: 3TNV80F-NCJT
  • Engine power (gross): 17.8 kW / 23.9 hp / SAE J1995 rated power
  • Power take-off (PTO) power: 13.4 kW / 18 hp
  • Rated engine speed: 3200 rpm
  • Type: Diesel
  • Injection pump type: Indirect injection
  • Aspiration: Natural
  • Emissions compliance: Final Tier 4
  • Cylinders/displacement: 3 / 1.267 L / 3 / 77 cu in.
  • Number of cylinders: Three
  • Cylinder liners: Cast-in-block
  • Bore and stroke: 80 x 84 mm / 3.2 x 3.3 in.
  • Compression ratio: 23:01
  • Lubrication: Pressurized
  • Cooling system: Water pump
  • Air cleaner: Dual element
  • Engine torque at rated speed: 53 Nm / 39.09 lb.-ft
  • Fuel tank capacity: 20.4 L / 5.39 gal.
Electrical
  • Battery size: 500 CCA
  • Alternator (12-V): 40 amp
  • Starter size: 1.2 kW / 1.6 hp
Fuel System
  • Type: Indirect injection
  • Fuel consumption: 5.8 L/hr / 1.5 U.S. gal./hr
Transmission
  • Standard transmission; forward/reverse: Hydrostatic - 2 range
  • Left-hand reverser: No
  • Final drive: Spur Gear
  • Brakes: Wet disc
  • Steering: Power steering
  • Axle capacity: Front / 612 kg / 1349 lb. / Rear / 1100 kg / 2425 lb.
  • Creeper: No
  • Cruise control: Standard
  • Differential lock: Yes
Hydraulics
  • Type: Open center
  • Pump rated output: Steering / 13.25 L/min / 3.5 gpm / Implement / 13.25 L/min / 3.5 gpm / 26.5 L/min / 7 gpm
  • Pump type: Gear
  • Maximum operating pressure: 148.2 bar / 2150 psi
  • Draft control sensing: Position control
  • Remote control valves available: Two
3-Point Hitch
  • Type: Limited Category 1
  • Lift capacity, 24-in. behind link arms: 400 kg / 882 lb.
Power Take-Off (PTO)
  • Standard: Rear - 540 rpm / Mid - 2100 rpm
  • Control: Independent
  • Clutch: Wet disc
  • Brake (for mid and rear PTO): Wet disc
Fluid Capacities
  • Crankcase with filter: 2.7 L / 2.9 qt
Final Drive
  • Type: Spur Gear
  • Differential lock: Yes
Operator Station
  • Rollover protective structure: Type / Foldable / OSHA, SAE, ASAE
  • Platform - flat/straddle: Three-piece semi flat
  • Gear shift location - console/floor: Left-hand side
Dimensions
  • Wheelbase: 1600 mm / 63 in.
  • Front axle clearance: 316 mm / 12.5 in.
  • Turning radius without brakes: 2.65 m / 8.7 ft
  • Limited slip differential: No
  • Approximate shipping weight (open-station; cab): 813.5 kg / 1793.4 lb.
Tires
  • Front: R3 Turf - 23x8.50-12 / R4 Industrial - 23x8.50-12 / R3 Radial - 220/55-R12
  • Rear: R3 Turf - 31x13.5-15 / R4 Industrial - 12-16.5 / R3 Radial - 280/70-R16
  • Front tread range: 95.3 cm / 37.5 in.
Miscellaneous
  • Toolbox: Yes
  • Tilt steering wheel: Yes
  • 12-V Outlet: Yes
NOTES:
*Manufacturer's suggested price. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. Offers valid in the United States. Prices in U.S. dollars.

Engine

Engine Manufacturer Yanmar
Engine Type 3TNV80F-NCJT
Horsepower 17.8 kW (23.9 hp)
PTO HP 13.4 kW (18 hp)
Rated RPM 3200 rpm
Bore and Stroke 80 x 84 mm (3.2 x 3.3 in.)

Specifications

Wheelbase 1600 mm (63 in.)
Weight 813.5 kg (1793.4 lb.)
Ground Clearance 316 mm (12.5 in.)
Tire Size Front: R3 Turf - 23x8.50-12 / R4 Industrial - 23x8.50-12 / R3 Radial - 220/55-R12; Rear: R3 Turf - 31x13.5-15 (R4 Industrial - 12-16.5 (R3 Radial - 280/70-R16)

General

Fuel System Indirect injection
Fuel Capacity 20.4 L (5.39 gal.)
Transmission Hydrostatic - 2 range
Brakes Wet disc
Hydraulics Open center

Shopping Tools