2023 John Deere 3038E
$35,199.99
Key Features
New/Used New
Availability
In Stock
LocationBoone's Power Equipment, Inc.
Stock #
143301
Condition
Excellent
Product Features
Dealer Notes
Includes 300E loader with 61" bucket.
$315/mo 0% for 84 months with 20% down till 10/25/24. Subject to qualifications through JDF. Plus tax & Delivery. Contact Boone's Sales Rep for details.
$315/mo 0% for 84 months with 20% down till 10/25/24. Subject to qualifications through JDF. Plus tax & Delivery. Contact Boone's Sales Rep for details.
Description
Key Features
- Standard four-wheel drive(4WD) for maximum traction
- Hydro transmission with Twin Touch™ pedals for ease of use
- Category 1 3-pt hitch compatible with dozens of implements
Key Specs
- Engine power (gross): SAE J1995 rated power: 27.4 kW / 36.7 hp / 37.2 PS at 2500 rpm
- Power take-off (PTO) power: 22.4 kW / 30 hp
- Steering hydraulics: 15.0 L/min / 4.0 gpm
- Implement hydraulics: 20.2 L/min / 5.3 gpm
- Hitch type: Category 1
- Lift capacity, 24-in. behind link arms: 615 kg / 1356 lb.
- Standard transmission; forward/reverse: Hydrostatic transmission (HST)
- Cruise control: Optional
- Approximate shipping weight (open-station; cab): Open operator station (OOS): 1210 kg / 2668 lb. / Cab: Not applicable
- Wheelbase: 1593 mm / 62.7 in.
Engine
- Family: FYDXL1.57TDA / EYDXL1.57TDA / GYDXL1.57TDA
- Manufacturer: Yanmar
- Engine model: 3TNV86CT-NJT2
- Engine power (gross): SAE J1995 rated power: 27.4 kW / 36.7 hp / 37.2 PS at 2500 rpm
- Power take-off (PTO) power: 22.4 kW / 30 hp
- Rated engine speed: 2500 rpm
- Type: Diesel
- Injection pump type: High pressure common rail direct injection
- Aspiration: Turbocharged
- Emissions compliance: Final Tier 4
- Cylinders/displacement: 3 / 1.57 L / 3 / 95.7 cu in.
- Number of cylinders: Three
- Cylinder liners: Cast-in-block
- Bore and stroke: 86 x 90 m / 3.4 x 3.54 in.
- Compression ratio: 19.1:1
- Lubrication: Pressurized
- Cooling system: Water Pump
- Air cleaner: Dual element
- Engine torque at rated speed: 104.7 Nm / 77.2 lb.-ft
- Fuel tank capacity: 28.5 L / 7.5 gal.
Electrical
- Battery size: 500 CCA
- Alternator (12-V): 55 amp
- Starter size: 1.4 kW / 1.9 hp
Fuel System
- Type: High pressure common rail direct injection
Transmission
- Standard transmission; forward/reverse: Hydrostatic transmission (HST)
- Left-hand reverser: No
- Final drive: Spur gear
- Brakes: Wet disk
- Steering: Power steering
- Axle capacity: Front / 880 kg / 1940 lb. / Rear / 1200 kg / 2645 lb.
- Creeper: No
- Cruise control: Optional
- Differential lock: Yes
Hydraulics
- Type: Open center
- Pump rated output: Steering / 15.0 L/min / 4.0 gpm / Implement / 20.2 L/min / 5.3 gpm / 35.2 L/min / 9.3 gpm
- Pump type: Dual gear
- Maximum operating pressure: 172 bar / 2495 psi
- Draft control sensing: Position control
- Remote control valves available: Up to two (Optional)
3-Point Hitch
- Type: Category 1
- Lift capacity, 24-in. behind link arms: 615 kg / 1356 lb.
Power Take-Off (PTO)
- Standard: Rear - 540 rpm
- Control: Independent
- Clutch: Wet disk
- Brake (for mid and rear PTO): Wet disk
Fluid Capacities
- Crankcase with filter: 4.5 L / 4.8 qt
- Transmission and hydraulic system: 20.8 L / 22 qt
Final Drive
- Type: Spur gear
- Differential lock: Yes
Operator Station
- Rollover protective structure: Type / Foldable
- Platform - flat/straddle: Straddle
- Gear shift location - console/floor: Left-hand side
Dimensions
- Wheelbase: 1593 mm / 62.7 in.
- Front axle clearance: Minimum: 299 mm / 11.8 in. / Maximum: 333 mm / 13.1 in.
- Turning radius without brakes: 2.9 m / 9.4 ft
- Approximate shipping weight (open-station; cab): OOS: 1210 kg / 2668 lb. / Cab: Not applicable
Tires
- Front: R1 Bar: 7-14 / R3 Turf: 27x8.5-15 / R4 Industrial: 25x8.5-14 / R4 Industrial: 27x8.5-15
- Rear: R1 Bar: 11.2-24 / R3 Turf: 41x14-20 / R4 Industrial: 15-19.5 / R4 Industrial: 43x16-20
NOTES:
*Manufacturer's suggested price. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. Offers valid in the United States. Prices in U.S. dollars.Engine
| Engine Manufacturer | Yanmar |
| Engine Type | 3TNV86CT-NJT2 |
| Horsepower | SAE J1995 rated power: 27.4 kW (36.7 hp) |
| PTO HP | 22.4 kW (30 hp) |
| Rated RPM | 2500 rpm |
| Bore and Stroke | 86 x 90 m (3.4 x 3.54 in.) |
Specifications
| Wheelbase | 1593 mm (62.7 in.) |
| Weight | OOS: 1210 kg (2668 lb.) |
| Ground Clearance | Minimum: 299 mm (11.8 in. (Maximum: 333 mm (13.1 in.) |
| Tire Size | Front: R1 Bar: 7-14 / R3 Turf: 27x8.5-15 / R4 Industrial: 25x8.5-14 / R4 Industrial: 27x8.5-15; Rear: R1 Bar: 11.2-24 (R3 Turf: 41x14-20 (R4 Industrial: 15-19.5 (R4 Industrial: 43x16-20) |
General
| Fuel System | High pressure common rail direct injection |
| Fuel Capacity | 28.5 L (7.5 gal.) |
| Transmission | Hydrostatic transmission (HST) |
| Brakes | Wet disk |
| Hydraulics | Open center |
