2024 John Deere Z930M 60" Mulch On Demand

Coming Soon

Coming Soon

Overview

New/Used New
Availability Coming Soon
LocationBoone's Power Equipment, Inc.
Stock # 03-629292
Condition Excellent

Product Features

Description

Key Features
  • 7-Iron™ PRO deck
  • Mulch On Demand™ Available
  • Gasoline Engine
  • Propane Option Available
  • Rear Discharge Deck
Engine
  • Manufacturer/Model: FX801V
  • Power: Gross at 3,600 rpm
  • 25.5 hp (19 kW)
  • Displacement: 52 cu in. (852 cc)
  • Cylinders: Two
  • Crankcase capacity With filter: 2.4 U.S. qt (2.3 L)
  • Oil filter: Full flow, replaceable
  • Lubrication: Full pressure
  • Cooling: Air
  • Air cleaner: Pre-cleaner Yes Heavy-duty canister type with safety element
Fuel System
  • Fuel type: Gasoline
  • Fuel consumption: Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr)
  • Fuel tank capacity: 11.5 U.S. gal. (43.5 L)
  • Fuel tank switch/shut-off valve: Yes
Electrical System
  • Charge system: 30 amp
  • Battery voltage: 12 V
  • Cold cranking amp: 300 amp
  • Hour meter: Standard, digital
  • Operator presence starting system: Brake-N-Go (hand)
Drivetrain
  • Transmission: Hydrostatic
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
  • Travel speed: Speed range: 0-12 mph (0-19.3 km/h); Forward: 0-12 mph (0-19.3 km/h); Reverse: 0-4.5 mph (0-7.2 km/h)
  • Speed and direction control: Twin levers
  • Hydraulic capacity: 5.9 U.S. qt (5.6 L)
  • Filter: Internal, replaceable
Tires
  • Drive wheels: 24x12-12
  • Load rating: 4 PR
Brakes
  • Dynamic braking: Twin levers
  • Park brake: Internal wet disk integrated in the transmission
  • Park brake actuation: Hand brake
PTO
  • Type: Electro-magnetic, 225 lb-ft. (305 Nm)
  • Drive: V-belt
Mower Decks
  • Size: 54-in. (137-cm) 7Iron™ PRO side-discharge; 60-in. (152-cm) 7Iron™ PRO side-discharge; 60-in. (152-cm) 7Iron™ PRO Mulch On Demand™; 60-in. (152-cm) FastBack™ PRO rear-discharge
  • Deck construction: 7-Iron™ PRO: 7-gauge, 0.179-in. (4.6-mm) one-piece forged steel; FastBack™ PRO: 7-gauge, 0.179-in. (4.6-mm) fabricated steel
  • Height-of-cut range Increments:: 0.25 in. (0.64 cm); 1-5.5 in. (2.54-14 cm)
  • Cutting width: 54, 60 in. (137, 152 cm)
Blades
  • Length: Varies by deck size
  • Thickness: 0.25 in. (0.64 cm)
  • Blade tip speed: 7Iron PRO: Approximately 18,500 fpm; 60-in. (152-cm) FastBack: Approximately 16,500 fpm
  • Number: Three
Wheels
  • Caster wheel type: Flat free
  • Caster wheels: 13x6.5-6
  • Front anti-scalp rollers: RH, center, LH
  • Rear anti-scalp rollers: Standard
Dimensions
  • Length: 84 in. (213 cm)
  • Width With chute down: 68, 74 in. 173, 188 cm; Rear discharge: 63.5 in. (161.3 cm)
  • Height With ROPS up: 73 in. (185 cm); With ROPS down: 47 in. (119 cm)
  • Weight: 1,296 to 1,383 lb (588 to 627 kg)
Buyer's Note
  • Warranty: 36 months or 1200 hours, whichever comes first
  • First 24 months, no hour limitation
Operation
  • Rollover protective structure (ROPS): Yes
  • Slope operating limit: 20 degrees (10 degrees with material collection system installed)

Engine

Horse Power 25.5 HP (19 kW)
Engine Type FX801V
Displacement 52 cu. in. (852 cc)

General

Transmission Hydrostatic
Fuel Capacity 11.5 gal. (43.5 L)

Deck

Deck Size 54 in. (137 cm); 60 in. (152 cm)

Shopping Tools