2024 John Deere Z950M 60" Side Discharge
$14,799.99
Overview
New/Used New
Availability
In Stock
LocationBoone's Power Equipment, Inc.
Stock #
130722
Condition
Excellent
Product Features
Description
Key Features
- 7-Iron™ PRO Mowing Deck
- Propane Option Available
- Gasoline Engine
- Rear Discharge Deck
Engine
- Manufacturer/Model: FX850V
- Power: Gross at 3,600 rpm 27 hp (20.1 kW)
- Displacement: 52 cu in. (852 cc)
- Cylinders: Two
- Crankcase capacity With filter: 2.4 U.S. qt (2.3 L)
- Oil filter: Full flow, replaceable
- Lubrication: Full pressure
- Cooling: Air
- Air cleaner: Pre-cleaner Yes Heavy-duty canister type with safety element
Fuel System
- Fuel type: Gasoline
- Fuel consumption: Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr)
- Fuel tank capacity: 11.5 U.S. gal. (43.5 L)
- Fuel tank switch/shut-off valve: Yes
Electrical System
- Charge system: 30 amp
- Battery voltage: 12 V
- Cold cranking amp: 300 amp
- Hour meter: Standard, digital
- Operator presence starting system: Brake-N-Go (hand)
Drivetrain
- Transmission: Hydrostatic
- Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
- Travel speed: Speed range: 0-12 mph (0-19.3 km/h); Forward: 0-12 mph (0-19.3 km/h); Reverse: 0-4.5 mph (0-7.2 km/h)
- Speed and direction control: Twin levers
- Hydraulic capacity: 5.9 U.S. qt (5.6 L)
- Filter: Internal, replaceable
Tires
- Drive wheels: 24x12-12
- Load rating: 4 PR
Brakes
- Dynamic braking: Twin levers
- Park brake: Internal wet disk integrated in the transmission
- Park brake actuation: Hand brake
PTO
- Type: Electro-magnetic, 225 lb-ft. (305 Nm)
- Drive: V-belt
Mower Decks
- Size: 60-in. (152-cm) 7Iron™ PRO side-discharge; 72-in. (183-cm) 7Iron™ PRO side-discharge; 54-in. (137-cm) 7Iron™ PRO Mulch On Demand™; 72-in. (183-cm) FastBack™ PRO rear-discharge
- Deck construction: 7-Iron™ PRO: 7-gauge, 0.179-in. (4.6-mm) one-piece forged steel; FastBack™ PRO: 7-gauge, 0.179-in. (4.6-mm) fabricated steel
- Height-of-cut range: Increments 0.25 in. (0.64 cm); 1-5.5 in. (2.54-14 cm)
- Cutting width: 54, 60, 72 in.
Blades
- Length: Varies by deck size
- Thickness: 0.25 in. (0.64 cm)
- Blade tip speed: 7Iron PRO: Approximately 18,500 fpm; 72-in. (183-cm) FastBack: Approximately 18,000 fpm
- Number: Three
Wheels
- Caster wheel type: Flat free
- Caster wheels: 13x6.5-6
- Front anti-scalp rollers: RH, center, LH
- Rear anti-scalp rollers: Standard
Dimensions
- Length: 84 in. (213 cm)
- Width With chute down: 68, 74, 86 in. (173, 188, 218 cm); Rear discharge: 75.8 in. (192.5 cm)
- Height With ROPS up: 73 in. (185 cm); With ROPS down, 47 in.: (119 cm)
- Weight: 1,296 to 1,412 lb (588 to 640 kg)
Buyer's Note
- Warranty: 36 months or 1200 hours, whichever comes first
- First 24 months, no hour limitation
Operation
- Rollover protective structure (ROPS): Yes
- Slope operating limit: 20 degrees (10 degrees with material collection system installed)
Engine
Horse Power | 27 HP (20.1 kW) |
Engine Type | FX850V |
Displacement | 52 cu. in. (852 cc) |
General
Transmission | Hydrostatic |
Fuel Capacity | 11.5 gal. (43.5 L) |
Deck
Deck Size | 60 in.; 72 in.; 54 in.; 72 in. |