2024 John Deere Z975M EFI 72" Rear Discharge Tweels
Coming Soon
Overview
New/Used New
Availability
Coming Soon
LocationBoone's Power Equipment, Inc.
Stock #
03-629289
Condition
Excellent
Product Features
Description
ZTrak™ Zero-Turn Mower
Key Features
- 37-hp (27.6 kW) EFI gasoline engine
- 60-in. and 72-in. 7-Iron™ PRO Side-Discharge Decks, 60-in. 7-Iron™ PRO Mulch On Demand™ Deck, 60-in. and 72-in. FastBack™ Pro Rear-Discharge Decks
- Brake-N-Go starting
- Cross-porting hydraulic transmission
Features
- Powerful 37 hp (27.6 kW) engine has electronic fuel injection (EFI) and electronic throttle control for quick starts and superior performance
- Extra durability and mowing performance from 7-Iron™ PRO Side-Discharge decks pressed from a single piece of steel
- Available Mulch On Demand™ deck
- Enhanced productivity, safety, and trim ability with a FastBack™ PRO rear-discharge mower deck
- Three seat choices with ComfortGlide™ fore/aft suspension offer exceptional operator comfort
- Upgraded electrical system includes display panel and speeds troubleshooting
- Three-year, bumper-to-bumper warranty
- Heavy-duty frame provides strength and durability
- Durable, hydrostatic drivetrain including cross porting delivers better cooling and provides easy access
- Mower is easy to service with many accessible components
- Protective zone around the operator is provided by the rollover protective structure (ROPS)
- Manage your commercial mowing fleet using John Deere Operations Center™
- Michelin® X® Tweel® Turf airless radial tire technology for ZTrak™ Mowers eliminates downtime and reduces cost of operation
Engine
- Manufacturer/Model: 61A7 EFI
- Power: Gross at 3,600 rpm 37 hp (27.6 kW)
- Displacement: 60.6 cu in. (993 cc)
- Cylinders: Two
- Crankcase capacity: With filter, 2.5 U.S. qt (2.4 L)
- Oil filter: Full flow, replaceable
- Lubrication: Full pressure
- Cooling: Forced air, with integrated clean out ports and oil cooler
- Air cleaner: Pre-cleaner Yes Heavy-duty canister type with safety element
Fuel System
- Fuel type: Gasoline
- Fuel consumption: Under normal conditions, load, operation, and dependent on loads and operating conditions 7Iron PRO side-discharge: 1.4 U.S. gal./hr (5.3 L/hr)
- Fuel consumption FastBack PRO rear-discharge: 1.3 U.S. gal./hr (4.9 L/hr)
- Fuel tank capacity: 11.5 U.S. gal. (43.5 L)
- Fuel tank switch/shut-off valve: No
Electrical System
- Charge system: 20 amp
- Battery voltage: 12 V
- Cold cranking amp: 300 amp
- Hour meter: Display panel including hour meter, fuel level, engine speed, system voltage, low engine oil pressure indicator, starting interlock indicators (PTO, operator presence, park brake), caution warning, stop warning, and on-board diagnostics
- Operator presence starting system: Brake-N-Go (hand)
Drivetrain
- Transmission: Hydrostatic
- Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor with cross porting
- Travel speed: Speed range - 0-12 mph (0-19.3 km/h) Forward - 0-12 mph (0-19.3 km/h) Reverse - 0-4.5 mph (0-7.2 km/h)
- Speed and direction control: Twin levers
- Hydraulic capacity: 5.9 U.S. qt (5.6 L)
- Filter: Internal, replaceable
Buyer's Note
- Warranty: 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation
Tires
- Drive wheels: 24x12-12
- Load rating: 4 PR
Brakes
- Dynamic braking: Twin levers
- Park brake: Internal wet disk integrated in the transmission
- Park brake actuation: Hand brake
PTO
- Type: Electro-magnetic, 250 lb-ft (339 Nm)
- Drive: V-belt
Mower Decks
- Size: 60-in. (152-cm) 7Iron™ PRO side-discharge; 72-in. (183-cm) 7Iron™ PRO side-discharge; 60-in. (152-cm) 7Iron™ PRO Mulch On Demand™; 60-in. (152-cm) FastBack™ PRO rear-discharge; 72-in. (183-cm) FastBack™ PRO rear-discharge
- Deck construction: 7-Iron™ PRO: 7-gauge, 0.179-in. (4.6-mm) one-piece forged steel; FastBack™ PRO: 7-gauge, 0.179-in. (4.6-mm) fabricated steel
- Height-of-cut range: Increments 0.25 in. (0.64 cm); 1-5.5 in. (2.54-14 cm)
- Cutting width: 60,72 in. (152, 183 cm)
Blades
- Length: Varies by deck size
- Thickness: 7Iron PRO: 0.25 in. (6.4 mm) FastBack PRO: 0.31 in. (8 mm)
- Blade tip speed: 7Iron PRO: Approximately 18,500 fpm; 60-in. (152-cm) FastBack: Approximately 16,500 fpm; 72-in. (183-cm) FastBack: Approximately 18,000 fpm
- Number: Three
Wheels
- Caster wheel type: Flat free
- Caster wheels: 13x6.5-6
- Front anti-scalp rollers: Left, center, right
- Rear anti-scalp rollers: 7Iron PRO: Left, center, right; FastBack PRO: Left, right
Dimensions
- Length: 60-in. deck: 87 in. (221 cm); 72-in. deck: 90 (229 cm)
- Width: With chute down, 74, 86 in. (188, 218 cm); Rear discharge, 63.5, 75.8 in. (161.3, 192.5 cm)
- Height: With ROPS up, 73 in. (185 cm); With ROPS down, 47 in. (119 cm)
- Weight: 1426 to 1523 lb (647 to 691 kg)
Operation
- Rollover protective structure (ROPS): Yes
- Slope operating limit: 20 degrees (10 degrees with material collection system installed)
Engine
Horse Power | 37 HP (27.6 kW) |
Engine Type | 61A7 EFI |
Displacement | 60.6 cu. in. (993 cc) |
General
Fuel Capacity | 11.5 U.S. gal. (43.5 L) |
Deck
Deck Size | 60 in.; 72 in. |